1 / 8
Equipment · 2K Dispensing Systems
Atlas Copco SCA Systems
Atlas Copco SCA structural adhesive systems: twin double-barrel pump towers sharing one HPS 5000 control cabinet, for 2K resin and hardener. 9 in stock in Plainfield, NJ, factory-tested in 2023 and never put into production.
What You Get
Twin pumps, one control
Two complete pump towers share a single HPS 5000 control cabinet: line 1 resin, line 2 hardener.
57:1 ratio, 5,075 psi
Rated for heavy structural adhesives, in the pressure class used for automotive body-in-white bonding.
Double-barrel, continuous feed
Each pump draws from a pair of drums, so an empty drum can be swapped while the other keeps feeding the line.
Factory-tested, never in production
Built in 2023 and tested at the Atlas Copco factory, with hoses still in factory wrap. Excess capacity, not equipment from a worn-out line.
Specifications
| Model | Atlas Copco SCA double-barrel piston pump |
|---|---|
| Type | PPW57-0571P16-1000-SCA-HPS |
| Material number | 86341.400623 |
| Configuration | Twin units, 2K material: line 1 resin, line 2 hardener |
| Ratio | 57:1 pumps, 1:1 2K material |
| Rams | P16 (160 cc) |
| Maximum material pressure | 5,075 psi / 350 bar |
| Maximum material temperature | 100 °C / 212 °F |
| Maximum air inlet pressure | 87 psi / 6 bar |
| Control | HPS 5000 heated pump controller, shared cabinet |
| Utilities | 380 VAC, 3-phase, 3-wire, 60 Hz; 24 A nominal, 60 A max breaker |
| Containers | 55-gallon drums, double-drum, 571 mm diameter |
| Year of manufacture | 2023 |