Rhino XD3 configuration code
Eight configurations are in stock. They share the same pump and follower and differ in wet end, panel and control side.
Tap any part of the code
Example: E,40,C,X,A-55TE,B,L is a carbon steel unit with a barcode panel and controls on the left.
| Code | Stands for | Meaning |
|---|---|---|
| E | Controls | Electric controls, 24 Vdc |
| 40 | Pump ratio | 40:1, up to 4,000 psi |
| C / S | Wet end | Carbon steel / stainless hydraulic section |
| X | Duty | Extreme duty (XD3) |
| A | Temperature | Ambient: no temperature conditioning |
| 55 | Follower | 55-gallon follower plate |
| T | Follower coating | PTFE-coated |
| E | Follower seal | EPDM |
| B / E / M | Panel | B and E: barcode panel · M: standard panel |
| L / R | Control side | Left / right |
How to choose
Wet end first. Carbon steel handles standard sealants and urethanes. Choose stainless for moisture-sensitive, reactive or corrosive materials that would attack carbon steel.
Then the control side: the side that faces your operator once the unit is in place on your line.
All eight configurations in stock are on the Rhino XD3 page.
VersaDrum VD200 model code
The first part describes the machine; the part after the slash lists its options.
Tap any part of the code
All three units in stock share the code VD200-UD6F6HN/XFACAWXEDE.
| Code | Stands for | Meaning |
|---|---|---|
| VD200 | Model | VersaDrum bulk melter for 200 L (55-gallon) drums |
| U | Platen | Smooth platen |
| D | Drum size | 571 mm platen, 200 L drums |
| 6 | Power | 480 VAC, 3-phase, 46 A |
| F | Pump | SN0371 gear pump, 17.8 kg/hr |
| 6 | Hoses | Six hose / applicator pairs |
| H | Seal | Standard seal |
| N | Sensors | Ni-120 temperature sensors |
| X | Fittings | 16 mm and 8 mm |
| F | Drum jacket | Fiber |
| A | Aeration | Automatic container aeration |
| C | Pressure | Closed-loop pressure control |
| A | Indication | Internal pressure indication |
| W | Status | Light tower |
| X | Main switch | Red, 3-pole |
| E | Network | EtherNet/IP |
| D | Drip shield | Retractable |
| E | Exhaust | Integrated exhaust hood |
Atlas Copco SCA type code
The type code describes the pump, its ratio and rams, the follower and the controller.
Tap any part of the code
All nine systems in stock are type PPW57-0571P16-1000-SCA-HPS, material number 86341.400623.
| Code | Stands for | Meaning |
|---|---|---|
| PPW57 | Pump | Pneumatic piston pump, W57 series |
| 0571 | Ratio | 57:1 |
| P16 | Rams | P16 rams, 160 cc |
| 1000 | Follower | Follower plate for 55-gallon drums |
| SCA | Product line | Atlas Copco SCA dispensing |
| HPS | Control | HPS heated pump controller |
Pro-Meter S PLC model name
The model name says how the meter is controlled; the part number identifies the exact unit.
Tap any part of the code
Each unit is a Pro-Meter S PLC with its remote meter box (RMB) already mounted.
| Code | Stands for | Meaning |
|---|---|---|
| Pro-Meter S | Model | Nordson Pro-Meter S, single-component servo meter |
| PLC | Control | Runs from a Process Sentry PLC controller over Ethernet |
| RMB | Remote meter box | P/N 1614740, mounted on every unit |
Part numbers in stock
The Pro-Meter has no option code; units are identified by their Nordson part number, printed on the nameplate: 1617412 and 1622553, each with remote meter box 1614740. Metering cylinders are 15 cc or 35 cc: ask us which unit has which.
Talk to our OEM Solutions Team
Tell us your material, container size and output. We'll match you to a unit in stock.